0
0 Cart (empty)

Search on blog

Last blog articles

la cimaise Classic Rail d’Artiteq désormais disponible en noir

la cimaise Classic Rail d’Artiteq désormais disponible en noir

Pourquoi choisir les cimaises Orac decor ?

Pourquoi choisir les cimaises Orac decor ?

Plinthe SX118 Orac Decor

Plinthe SX118 Orac Decor

Cimaise Newly R20

Cimaise Newly R20

Cimaise Newly R30

Cimaise Newly R30

See all

We sell

All sale products

Best sellers

All best sellers

How to install the r20 newly picture rail?

Installing the R20 Newly picture rail is quick and easy, thanks to its ingenious design. Here is a detailed guide to successfully installing it:


Materials needed:

  • R20 Newly Picture Rail
  • Newly mounting clips (included)
  • Drill and suitable bits
  • Screws and dowels (supplied or suitable for wall type)
  • Screwdriver
  • Spirit level
  • Marking pencil
  • Hacksaw (if you need to adjust the length of the rail)

Installation steps:

1. Prepare the installation

  • Choose the location for your picture rail, generally close to the ceiling for an aesthetic result.
  • Use a spirit level to mark a straight line on the wall where you want to attach the track.

2. Position the Newly fixing clips

  • The clips should be spaced approximately 40 cm apart to ensure good stability.
  • Place a clip about 5-10cm from each end of the rail.

3. Mark the drilling points

  • Position the mounting clips along the drawn line and mark the mounting hole locations with a pencil.

4. Drill and fix the clips

  • Drill the holes at the marked locations.
    • Wall type :
      • For a concrete or brick wall, use suitable anchors.
      • For a plaster or plasterboard wall, choose specific anchors.
  • Secure the Newly clips with screws, making sure they are properly aligned.

5. Install the R20 Newly rail

  • Place the R20 Newly rail on the fixing clips.
  • Press firmly to clip it in place. You will hear a "click" when the rail is correctly in place.

6. Check the installation

  • Make sure the rail is secure and stable.
  • Test by adding a hanging wire and hook to verify that everything is working properly.

Additional tips:

  1. Length adjustment :
    If necessary, cut the rail to the correct length with a hacksaw. File the cut edges to avoid sharp edges.

  2. Angles and connections :
    Use corner connectors or to connect multiple rails together to maintain a neat aesthetic.

  3. Position relative to the ceiling :
    Leave sufficient space between the rail and the ceiling to allow for easy installation and use.


Once installed, the R20 Newly system provides a robust and elegant solution for hanging your artwork, whilst ensuring a clean and professional finish.

Share this content